Statistics
| Branch: | Tag: | Revision:

root / firmware / microblaze / apps @ aab51fa4

Name Size
  bitrot
.gitignore 66 Bytes
Makefile.am 1.95 KB
app_passthru_v2.c 6.28 KB
app_passthru_v2.h 1.57 KB
blink_leds.c 998 Bytes
blink_leds2.c 1.28 KB
buf_ram_test.c 1.79 KB
burn_dbsrx_eeprom.c 2.42 KB
burnrev30.c 3.3 KB
burnrev31.c 3.3 KB
burnrev40.c 3.3 KB
can_i_sub.c 325 Bytes
double_buffer_fragment.c 3.55 KB
echo.c 878 Bytes
eth_serdes.c 5.71 KB
factory_test.c 10.2 KB
gen_eth_packets.c 4.74 KB
gen_pause_frames.c 4.46 KB
hello.c 841 Bytes
ibs_rx_test.c 1.67 KB
ibs_tx_test.c 3.89 KB
mimo_app_common_v2.c 14.9 KB
mimo_app_common_v2.h 1.78 KB
mimo_tx.c 8.62 KB
mimo_tx_slave.c 9.33 KB
rcv_eth_packets.c 5.11 KB
read_dbids.c 1.44 KB
sd_bounce.c 2.99 KB
sd_gentest.c 6.34 KB
serdes_to_dsp.c 4.23 KB
serdes_txrx.c 8.98 KB
set_hw_rev.c 1.28 KB
test1.c 6.43 KB
test_db_spi.c 1 KB
test_i2c.c 2.28 KB
test_lsadc.c 1.24 KB
test_lsdac.c 1.26 KB
test_phy_comm.c 2.39 KB
test_ram.c 2.13 KB
test_sd.c 1.65 KB
timer_test.c 1.22 KB
tx_standalone.c 7.88 KB
txrx.c 23.9 KB

Latest revisions

# Date Author Comment
22ed61f9 12/23/2010 03:19 am Josh Blum

zpu: renamed the directory for the usrp2 fw to zpu to reflect the cpu type

71fc99d0 12/23/2010 03:11 am Josh Blum

usrp2: got fw working on usrp2+nseries (crosses fingers)

The abort issue seemed to be cause by the listeners table not being initialized.
Also gave the pic handler the initialization works to be consistent but not needed as it was static initialized.
And finally, doubly set the packet router handshake ctrl before entering the claim calls (seemed to fix the lockup, perhaps a bad init state?)

434ee07c 12/23/2010 01:45 am Josh Blum

Merge branch 'udp_ports' into next

Conflicts:
firmware/microblaze/apps/txrx_uhd.c
host/lib/usrp/usrp2/mboard_impl.cpp
host/lib/usrp/usrp2/usrp2_impl.cpp
host/lib/usrp/usrp2/usrp2_impl.hpp

4c3ba019 12/18/2010 08:09 am Josh Blum

usrp-n210: removed fw warnings, bootloader does full size 16k load

0e66165d 12/17/2010 09:45 pm Josh Blum

udp_ports: set the source and destination ports

d6eae206 12/16/2010 07:51 am Josh Blum

usrp2: added support in fw for setting dsp0 and err0 ports with protocol framer changes

01d5209e 12/14/2010 09:13 pm Josh Blum

Merge branch 'zpu' into next

42c8c087 12/14/2010 09:10 pm Josh Blum

zpu: working txrx, modified blink lights to look better, no interrupt (poll handler)

219bcb1a 12/13/2010 11:54 pm Josh Blum

packet_router: reject icmp dest unreachable when port does not match

096405b9 12/12/2010 02:43 am Josh Blum

packet_router: added control register to set the udp control port

View revisions

Also available in: Atom