uhd

#

# Copyright 2008 Ettus Research LLC

# 

# This file is part of GNU Radio

# 

# GNU Radio is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 3, or (at your option)

# any later version.

# 

# GNU Radio is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

# 

# You should have received a copy of the GNU General Public License

# along with GNU Radio; see the file COPYING.  If not, write to

# the Free Software Foundation, Inc., 51 Franklin Street,

# Boston, MA 02110-1301, USA.

# 

##################################################

# xtclsh Shell and tcl Script Path

##################################################

#XTCLSH := /opt/Xilinx/10.1/ISE/bin/lin/xtclsh

XTCLSH := xtclsh

ISE_HELPER := ../tcl/ise_helper.tcl

##################################################

# Project Setup

##################################################

BUILD_DIR := build/

export TOP_MODULE := u1e

export PROJ_FILE := $(BUILD_DIR)$(TOP_MODULE).ise

##################################################

# Project Properties

##################################################

export PROJECT_PROPERTIES := \

family "Spartan-3A DSP" \

device xc3sd1800a \

package cs484 \

speed -4 \

top_level_module_type "HDL" \

synthesis_tool "XST (VHDL/Verilog)" \

simulator "ISE Simulator (VHDL/Verilog)" \

"Preferred Language" "Verilog" \

"Enable Message Filtering" FALSE \

"Display Incremental Messages" FALSE 

##################################################

# Sources

##################################################

export SOURCE_ROOT := ../../../

export SOURCES := \

control_lib/CRC16_D16.v \

control_lib/atr_controller16.v \

control_lib/bin2gray.v \

control_lib/dcache.v \

control_lib/decoder_3_8.v \

control_lib/dpram32.v \

control_lib/gray2bin.v \

control_lib/gray_send.v \

control_lib/icache.v \

control_lib/mux4.v \

control_lib/mux8.v \

control_lib/nsgpio16LE.v \

control_lib/ram_2port.v \

control_lib/ram_2port_mixed_width.v \

control_lib/ram_harv_cache.v \

control_lib/ram_loader.v \

control_lib/setting_reg.v \

control_lib/settings_bus_16LE.v \

control_lib/srl.v \

control_lib/system_control.v \

control_lib/wb_1master.v \

control_lib/wb_readback_mux.v \

control_lib/simple_uart.v \

control_lib/simple_uart_tx.v \

control_lib/simple_uart_rx.v \

control_lib/oneshot_2clk.v \

control_lib/sd_spi.v \

control_lib/sd_spi_wb.v \

control_lib/wb_bridge_16_32.v \

control_lib/reset_sync.v \

simple_gemac/simple_gemac_wrapper.v \

simple_gemac/simple_gemac.v \

simple_gemac/simple_gemac_wb.v \

simple_gemac/simple_gemac_tx.v \

simple_gemac/simple_gemac_rx.v \

simple_gemac/crc.v \

simple_gemac/delay_line.v \

simple_gemac/flow_ctrl_tx.v \

simple_gemac/flow_ctrl_rx.v \

simple_gemac/address_filter.v \

simple_gemac/ll8_to_txmac.v \

simple_gemac/rxmac_to_ll8.v \

simple_gemac/miim/eth_miim.v \

simple_gemac/miim/eth_clockgen.v \

simple_gemac/miim/eth_outputcontrol.v \

simple_gemac/miim/eth_shiftreg.v \

control_lib/newfifo/buffer_int.v \

control_lib/newfifo/buffer_pool.v \

control_lib/newfifo/fifo_2clock.v \

control_lib/newfifo/fifo_2clock_cascade.v \

control_lib/newfifo/ll8_shortfifo.v \

control_lib/newfifo/ll8_to_fifo36.v \

control_lib/newfifo/fifo_short.v \

control_lib/newfifo/fifo_long.v \

control_lib/newfifo/fifo_cascade.v \

control_lib/newfifo/fifo36_to_ll8.v \

control_lib/newfifo/fifo19_to_fifo36.v \

control_lib/longfifo.v \

control_lib/shortfifo.v \

control_lib/medfifo.v \

coregen/fifo_xlnx_2Kx36_2clk.v \

coregen/fifo_xlnx_2Kx36_2clk.xco \

coregen/fifo_xlnx_512x36_2clk.v \

coregen/fifo_xlnx_512x36_2clk.xco \

coregen/fifo_xlnx_64x36_2clk.v \

coregen/fifo_xlnx_64x36_2clk.xco \

extram/wb_zbt16_b.v \

opencores/8b10b/decode_8b10b.v \

opencores/8b10b/encode_8b10b.v \

opencores/aemb/rtl/verilog/aeMB_bpcu.v \

opencores/aemb/rtl/verilog/aeMB_core_BE.v \

opencores/aemb/rtl/verilog/aeMB_ctrl.v \

opencores/aemb/rtl/verilog/aeMB_edk32.v \

opencores/aemb/rtl/verilog/aeMB_ibuf.v \

opencores/aemb/rtl/verilog/aeMB_regf.v \

opencores/aemb/rtl/verilog/aeMB_xecu.v \

opencores/i2c/rtl/verilog/i2c_master_bit_ctrl.v \

opencores/i2c/rtl/verilog/i2c_master_byte_ctrl.v \

opencores/i2c/rtl/verilog/i2c_master_defines.v \

opencores/i2c/rtl/verilog/i2c_master_top.v \

opencores/i2c/rtl/verilog/timescale.v \

opencores/simple_pic/rtl/simple_pic.v \

opencores/spi/rtl/verilog/spi_clgen.v \

opencores/spi/rtl/verilog/spi_defines.v \

opencores/spi/rtl/verilog/spi_shift.v \

opencores/spi/rtl/verilog/spi_top16.v \

sdr_lib/acc.v \

sdr_lib/add2.v \

sdr_lib/add2_and_round.v \

sdr_lib/add2_and_round_reg.v \

sdr_lib/add2_reg.v \

sdr_lib/cic_dec_shifter.v \

sdr_lib/cic_decim.v \

sdr_lib/cic_int_shifter.v \

sdr_lib/cic_interp.v \

sdr_lib/cic_strober.v \

sdr_lib/clip.v \

sdr_lib/clip_reg.v \

sdr_lib/cordic.v \

sdr_lib/cordic_z24.v \

sdr_lib/cordic_stage.v \

sdr_lib/dsp_core_rx.v \

sdr_lib/dsp_core_tx.v \

sdr_lib/hb_dec.v \

sdr_lib/hb_interp.v \

sdr_lib/round.v \

sdr_lib/round_reg.v \

sdr_lib/rx_control.v \

sdr_lib/rx_dcoffset.v \

sdr_lib/sign_extend.v \

sdr_lib/small_hb_dec.v \

sdr_lib/small_hb_int.v \

sdr_lib/tx_control.v \

serdes/serdes.v \

serdes/serdes_fc_rx.v \

serdes/serdes_fc_tx.v \

serdes/serdes_rx.v \

serdes/serdes_tx.v \

timing/time_receiver.v \

timing/time_sender.v \

timing/time_sync.v \

timing/timer.v \

gpmc/gpmc.v \

gpmc/edge_sync.v \

gpmc/dbsm.v \

gpmc/gpmc_to_fifo.v \

gpmc/gpmc_wb.v \

top/u1e/u1e_core.v \

top/u1e/u1e.ucf \

top/u1e/u1e.v 

##################################################

# Process Properties

##################################################

export SYNTHESIZE_PROPERTIES := \

"Number of Clock Buffers" 6 \

"Pack I/O Registers into IOBs" Yes \

"Optimization Effort" High \

"Optimize Instantiated Primitives" TRUE \

"Register Balancing" Yes \

"Use Clock Enable" Auto \

"Use Synchronous Reset" Auto \

"Use Synchronous Set" Auto

export TRANSLATE_PROPERTIES := \

"Macro Search Path" "$(shell pwd)/../../coregen/"

export MAP_PROPERTIES := \

"Allow Logic Optimization Across Hierarchy" TRUE \

"Map to Input Functions" 4 \

"Optimization Strategy (Cover Mode)" Speed \

"Pack I/O Registers/Latches into IOBs" "For Inputs and Outputs" \

"Perform Timing-Driven Packing and Placement" TRUE \

"Map Effort Level" High \

"Extra Effort" Normal \

"Combinatorial Logic Optimization" TRUE \

"Register Duplication" TRUE

export PLACE_ROUTE_PROPERTIES := \

"Place & Route Effort Level (Overall)" High 

export STATIC_TIMING_PROPERTIES := \

"Number of Paths in Error/Verbose Report" 10 \

"Report Type" "Error Report"

export GEN_PROG_FILE_PROPERTIES := \

"Configuration Rate" 6 \

"Create Binary Configuration File" TRUE \

"Done (Output Events)" 5 \

"Enable Bitstream Compression" TRUE \

"Enable Outputs (Output Events)" 6 \

"Unused IOB Pins" "Pull Up"

export SIM_MODEL_PROPERTIES := ""

##################################################

# Make Options

##################################################

all:

	@echo make proj, check, synth, bin, or clean

proj:

	PROCESS_RUN="" $(XTCLSH) $(ISE_HELPER)	

check:

	PROCESS_RUN="Check Syntax" $(XTCLSH) $(ISE_HELPER)	

synth:

	PROCESS_RUN="Synthesize - XST" $(XTCLSH) $(ISE_HELPER)	

bin:

	PROCESS_RUN="Generate Programming File" $(XTCLSH) $(ISE_HELPER)		

clean:

	rm -rf $(BUILD_DIR)