Activity
From 04/17/2011 to 06/15/2011
06/15/2011
- 11:57 pm Revision 79079a34: N2XX: firmware stops device streaming on fw update, and updater script checks ...
- 11:56 pm Revision 0994660d: uhd: changed compat numbers to reflect dsp work in fpga
- 11:55 pm Revision 471c6cd2: USRP2/N2x0: incremented compat numbers for frontend work
- 11:45 pm Revision 4802b024: Merge branch 'usrp_e100_aux_spi' into frontend_work
- 11:38 pm Revision 8ec416f6: Merge branch 'usrp_e100_aux_spi' into dsp_rebase
- * usrp_e100_aux_spi:
usrp-e100: removed passthrough files, not needed w/ aux spi for clock chip
usrp-e100: make r... - 11:35 pm Revision 578df09d: u1e/u1p: new register map for new dsp
- 11:03 pm Revision b9a32f31: usrp: added registers and mux calculation for fe work
- 10:47 pm Revision 335e9ae5: Merge branch 'benchmark_rate'
- 10:08 pm Revision 3e9a0438: uhd: use aligned loads and stores for floats in sse2 conversion routines
- 09:50 pm Revision 0cef788d: Merge branch 'next'
- 09:49 pm Revision 27f1622d: b100: removed defunct test utilities
- 09:42 pm Revision b769fe40: uhd: more benchmark tweaks, removed old benchmark rx
- 09:17 pm Revision 24ce62d7: usb: fix for fx2_ctrl include issue
- 09:17 pm Revision 868d5862: uhd: added dropped samples calculation to rx test
- 09:17 pm Revision 21db20f3: uhd: created benchmark rate app
- 09:17 pm Revision 5f8d1467: uhd: increment version minor for release
- 09:11 pm Revision 3fb011a2: b100: update find to match usrp1 style + features
- 06:34 pm Revision 1bfb999b: b100: removed usrp prefix from files
- 05:37 pm Revision ff143516: Merge branch 'philip/e100-fpga-test-fixes' into next
- 06:58 am Revision ed3439ee: b100: fix fx2_ctrl include to use relative path
- 06:49 am Revision 7951170c: usb: fix for fx2_ctrl include issue
- 06:35 am Revision 5bbc3c62: e100: clean up gpio wrapper stuff, fix order of setup in make()
- 04:48 am Revision 9b3bd071: u1p: work in dual rx and frontend from u1e
- 04:20 am Revision 7cd986c7: u1p: new tx dsp frontend, copied from u1e
- 03:58 am Revision 948b9026: u1e-dsp: attach tx dc offset and iq balance
- 02:25 am Revision 3a98692c: uhd: increment version minor for release
- 02:15 am Revision 522677b3: n2xx: makefile typo fixes
- 02:08 am Revision 3d771334: b100: added images to Makefile
- 12:56 am Revision deae10bc: b100: added b100 firmware (squashed)
- 12:56 am Revision 5dfc4581: b100: added b100 host (squashed)
- 12:44 am Revision 2d8d1a4d: uhd: updated images Makefile
- 12:29 am Revision dd157937: Merge branch 'fpga_next' into uhd_next
- 12:27 am Revision bafe93a2: usrp_e100: super packet handler support squashed
- 12:27 am Revision 89fa3291: usrp1: super packet handler support squashed
- 12:27 am Revision f7c8ee26: uhd: removed vrt packet handler code
- 12:27 am Revision b092b291: uhd: fix some warnings under msvc in sph
- 12:27 am Revision d04fe45f: uhd: update packet handlers when the clock rate is changed
- 12:27 am Revision e59b6652: uhd: fix for resize routine of super packet handler
- 12:27 am Revision 8173943e: usrp_e100: init the subdev specs before calling io_init
- 12:27 am Revision a1f36ebf: uhd: under/over flow app notes
- 12:27 am Revision 86f12cd1: uhd: added scaling factor to conversion routines
- 12:27 am Revision 29735b8e: UHD: Orc implementation added and CMake magic put in. Won't link.
- 12:27 am Revision 75d0a41c: UHD: Orc conversion routine works
- 12:27 am Revision 3dca19a3: UHD: Fixed convert_test (scalars backwards), fixed Orc conversions (endianness...
- 12:27 am Revision 00ee732c: UHD: added item32<->sc16 conversions in Orc
- 12:27 am Revision 179505fd: use temp vars in sc16->item32 to make orcc happy
- 12:27 am Revision 397521fc: usrp2: super packet handler support squashed
- 12:27 am Revision 85ebb705: NEON detection for E100 in convert/
- 12:27 am Revision c65a1f8e: uhd: supper packet handler support squashed
- 12:27 am Revision a1b675a4: Remove unnecessary include
- 12:23 am Revision fb85b0c9: N210: stop sending 1 char at a time to the GPSDO
- 12:16 am Revision f9f24deb: N2XX: fix UART bug for GPSDO
06/14/2011
- 10:32 pm Revision be749688: usrp1: moved fx2 control into its own directory
- 08:25 pm Revision e4e96f2b: uhd: allow benchmark to continue on untracked error codes
- 06:52 pm Revision bc879718: e100: bug fix w/ SID parsing (endianess)
- 04:21 pm Revision 9abe8aed: uhd: made all bounded_buffer methods forced inline
- 04:19 pm Revision 794a74cc: udp: replaced callbacks in zero copy interface by giving direct queue access
- The managed receive buffer knows how to restore itself into the queue when released.
The managed send buffer knows ho...
06/13/2011
- 07:56 pm Revision 8b57d850: e100: disable debug prints in io impl
- 06:59 pm Revision 1bb2525e: e100: dual dsp working, cleanup for io impl, needs more testing
- 04:32 am Revision 9613e9d9: dsp: implement iqbal on tx
- 01:09 am Revision a6ca4778: usrp-e-timed : Fix stupid typo in tx rate calculation.
- 01:01 am Revision f9141950: usrp-e-loopback : Fix transfer rate calculation.
- Calculation now uses fractional seconds, not integer seconds.
06/12/2011
- 09:11 pm Revision 96763727: u1e: new write interface, with 2x clock
- 09:03 pm Revision cd9308eb: u1e: new 2 clock fifo, 18 bits by 1K
06/11/2011
06/10/2011
- 10:39 pm Revision b36096d1: B100/USRP1: fix bug where fpga size div by 64 resulted in never finishing load
- 10:23 pm Revision 09cf8eb1: uhd: added more SAFE_CALL macros to hardware wrapper dtors
- And removed the calls on the sptr resets (not needed now).
- 10:03 pm Revision c0fadece: N2XX: this method for defining R3/R4 actually works
- 08:11 pm Revision e709e4d3: uhd: added safe call on a few dboard related deconstructors
06/09/2011
- 11:18 pm Revision 3724b821: usrp-e100: fix message typo, its master_clock_rate
- 05:00 pm Revision 4573bf14: usrp-e100: removed passthrough files, not needed w/ aux spi for clock chip
- 01:55 am Revision 903c69ff: usrp-e100: make reg_test32 persistent across resets, bump compat number
06/08/2011
- 11:05 pm Revision d0a8d325: usrp-e100: work on aux spi
- 05:55 pm Revision 8217bfca: dsp: small_hb_dec now 24 bits wide as well
- 05:55 pm Revision d7a3b89d: dsp: added tx_frontend, instantiated in u2/u2p
- 05:55 pm Revision 5971f8e8: dsp: remove unused setting reg
- 05:55 pm Revision f335b169: dsp: do everything at 24 bits wide
- 05:55 pm Revision e0d0bbb8: u1e: update u1e to use new rx_frontend, and give it a 2nd rx dsp core
- 05:52 pm Revision 6592deb4: dsp: add guard bit to top of cordic to allow clipping on output instead of wra...
- 05:52 pm Revision 6c28203a: dsp: pass 24 bit wide signals between frontend and dsp core.
- Overkill, but we have the bits already, so why throw them away?
- 05:52 pm Revision b88383ad: dsp: clip in hb_dec to prevent the rare overflow with certain frequencies at m...
- 05:52 pm Revision 967ca165: u2/u2p: use all 24 bits from the rx_frontend
- 05:52 pm Revision 36e3085d: dsp: fix off-by-one error in timing of hb_dec
- 05:52 pm Revision b5283ddf: dsp: register hb output
- 05:52 pm Revision b9b18331: dsp: no need to keep all the low order bits from the accumulator
- 05:52 pm Revision d35bbdf5: dsp: increase gain of small_hb_dec because it used to scale down by factor of ...
- 05:52 pm Revision e0654430: dsp: use round_sd in small_hb_dec
- 05:52 pm Revision f2ea250d: dsp: reorganized scaling and rounding, removed multipliers (will put back in a...
- 05:52 pm Revision 554d08ae: dsp: testbenches for dsp blocks
- 05:52 pm Revision f21bc7ee: dsp: tx_dcoffset, not integrated yet
- 05:52 pm Revision 2edca948: dsp: do proper rounding at the end of dsp chain
- 05:52 pm Revision 3a4e028a: dsp: add resets for simulation purposes
- 05:52 pm Revision 3993b882: dsp: reworked muxes on rx
- 05:52 pm Revision 757d06d2: dsp: more typos
- 05:52 pm Revision e78a301e: dsp: new files in dsp directory
- 05:52 pm Revision 2e2de3f8: dsp: fix typos
- 05:52 pm Revision 56853530: dsp: add2_and_clip_reg and round_sd now are now strobed to be compatible
- with strobed (non-full rate) data
- 05:52 pm Revision 90c74cd4: u2/u2p: use new rx_frontend in u2 and u2p
- 05:52 pm Revision 7b127e2f: dsp: use sigma delta rounding in rx_dcoffset and in dsp_core_rx
- 05:52 pm Revision 569d9ee6: dsp: reworked round_sd, it is much simpler now
- 05:52 pm Revision 883d5af4: unused nets
- 05:52 pm Revision 47967a43: dsp: pass the error through in the rounding function
- 05:52 pm Revision 2bad9b4d: u2/u2p: misc connection and compilation fixes
- 05:52 pm Revision b9731980: dsp: first cut at sigma-delta rounding
- 05:52 pm Revision f8a04a48: u2/u2p: pull IQ balance and dcoffset out of dsp_core, put in frontend module
- 05:52 pm Revision ce43cdfc: redone DC offset with sigma-delta quantization
- 02:46 am Revision 23c373f4: fix copyright notice
- 02:42 am Revision bfaa5d14: added copyrights
06/07/2011
- 11:48 pm Revision e4be5c90: lots of renaming and moving around of toplevel directories to reflect product ...
- 11:26 pm Revision f0a9f021: remove old ethernet tester, no longer needed or working
- 11:23 pm Revision 6d0fa9ac: removed bit-rotted test harness
- 11:17 pm Revision addc1b74: remove old iad stuff
- 10:56 pm Revision 4172aa82: N210: added makefiles in for rev 4 versions (use LVDS)
- 09:42 pm Revision e7eb44d5: first cut at using lvds for adc pins
- 09:42 pm Revision 58fe6931: u2p-lvds: remove unused nets
- 09:42 pm Revision e2eca54d: builds now
- 09:42 pm Revision 9451cb63: u2p: FPGA internal termination on the clock line from ADC
- 05:05 pm Revision 72de17aa: uhd: many tweaks for tx_waveforms including performance
06/06/2011
- 08:20 pm Revision e625e890: uhd: increment version minor for release
- 09:21 am Revision 8da2d842: usrp-e100: bring up the clock as the first thing
- We init the clock as the app wants it as the first thing we do.
This greatly simplifies logic, no need to conditional... - 03:58 am Revision f239b851: usrp-e100: removed clockgen config stuff and docs
- 03:09 am Revision 01d85c73: usrp-e100: added check for wishbone readback and clock recovery
06/05/2011
06/03/2011
06/02/2011
- 05:52 pm Revision 088f8659: wbx: mixers always enabled, ant switches always defined
- 01:03 am Revision 365ab9f8: uhd: pseudocode tweaks for sync docs
- 12:46 am Revision 9f8a2d03: usrp2: catch exceptions thrown in locker loop (like the user unplugs device)
06/01/2011
- 09:06 pm Revision 70abc2e2: Merge branch 'sync_docs'
- 09:06 pm Revision 8d724c4f: Merge branch 'gpsdo_ant_power_docs'
- 08:57 pm Revision 19ecd433: uhd: tweaks to log and msg implementation
- The implementations now contain the string stream in each instance.
This way there is not a global stringstream to lo... - 06:29 pm Revision 35212f34: Added GPSDO antenna specs
- 04:09 pm Revision e081fe1f: updated sync doc for clarity & examples
05/31/2011
- 04:54 pm Revision c4132881: uhd: added app notes to docs on tuning
- 03:24 pm Revision 289a24e5: usrp2: added app notes on multi channel RX
- 06:46 am Revision 22bfca26: uhd: notes on LO calibration, and tweaks
05/29/2011
05/27/2011
- 07:46 pm Revision db6fa381: tx_bursts: minor change
- 07:32 pm Revision 5025104a: tx_bursts: optional repeat
- 12:35 am Revision 79596926: u2p-rebase: go back to versions on next
- 12:31 am Revision 552e81bf: u1p: implement a signal to indicate a partially full usb lut, to flush it
- 12:31 am Revision 42561353: u1p: reset gpif
- 12:31 am Revision 08149d4c: u1p: connect frames per packet
- 12:31 am Revision 56b133ea: B100: added some packet splitter debug pins, removed debug from GPIO port, swa...
- 12:31 am Revision e9a34b8b: u1p: need to declare wires
- 12:31 am Revision 37cffdd3: u1p: vita packet generator for testing purposes
- 12:31 am Revision b51ef6e5: should split and reframe packets properly
- 12:31 am Revision d0bfde42: u1p: do padding outside of gpif_rd, in packet_splitter
- 12:31 am Revision dcabd7f3: u1p: should fix underrun reporting
- 12:31 am Revision a2764a78: u1p: modify dsp_framer36 to allow it to skip the udp prot eng headers.
- This way it works with u1e, u1p, as well as u2/u2p
- 12:31 am Revision 8c8f38b0: u1p: add new file to build
- 12:31 am Revision df88b4a5: u1p: modernize, fix warnings, debug pins
- 12:31 am Revision 9fe53488: u1p: debug pins
- 12:31 am Revision b8f5df99: u1p: unused signals
- 12:31 am Revision 88cc06c1: u1p: better way of reframing the packets
- 12:31 am Revision d71f8599: u1p:wr testbench
- 12:31 am Revision 39f96a47: u1p: fix bus widths and other warnings
- 12:31 am Revision ac3e42d1: u1p: gpif-to-fx2 path should now handle arbitrary sized packets, up to 2KB
- 12:31 am Revision f5ef9116: u1p: pass tx status/error packets back through GPIF over the response channel ...
- 12:31 am Revision 262c6e92: u1p: added loopback and timed capability just like u1e
- 12:31 am Revision fd2f7f33: u1p: revert change to address bus width
- 12:31 am Revision f04a393d: u1p: use icarus verilog to find warnings
- 12:31 am Revision a4dc4a53: u1p: use 18 bit fifos and use full size of a block ram in the tx path
- 12:31 am Revision 61ace1e0: u1p: added debug0, debug1 for GPIF debugging
- 12:31 am Revision 40856137: u1p: add clear ports to gpif, not hooked up yet
- 12:31 am Revision a24962fc: u1p: remove extram from Makefile
- 12:31 am Revision 3a244ca4: successful test
- 12:31 am Revision 5772aa4b: modernize the make files, it now compiles. not tested.
- 12:31 am Revision 9515a3a8: select bus is 2 bits wide
- 12:31 am Revision e7e51ee8: I2C slave address decoding for 16-bit dw instead of 32-bit
- 12:31 am Revision 65ee9c7a: Fixed I2C pin names.
- 12:31 am Revision a9f3336e: add padding into gpif response path
- 12:31 am Revision 0ce67c4b: pad out packets to a minimum length
- 12:31 am Revision 8f78482c: fixed length command packets
- 12:31 am Revision 9ff35c8e: give response packets the same format as tx packets
- 12:31 am Revision 9136be22: u1p: catch up with all the recent u1e changes
- 12:31 am Revision 24f8740e: old and unused
- 12:31 am Revision cde50d7a: put gpio back in
- 12:31 am Revision d3f97446: fifo to wb should be functionally complete, needs testing
- 12:31 am Revision 6f19b5f9: not used
- 12:31 am Revision 294b8a28: fix ctrl/resp path to pass all 16 bits of data instead of the bottom bit
- typos fixed, everything is connected now, should just have off-by-1 error
lots of debug pins added - 12:31 am Revision 92a608b2: send reset to the gpif
- 12:31 am Revision 955572c4: constrain the gpif clock
- 12:31 am Revision af9c419e: first steps to a command packet handler for u1+
- 12:31 am Revision 8e6bbbbc: redone gpif interface to match nick's new spec
- 12:31 am Revision e55e1540: use vita_tx_chain top level block
- 12:31 am Revision 7e7e329a: Use the 4th LED which is shared on the cfg_init_b pin
- 12:31 am Revision 900f8cd5: added a loopback control port, will do full wishbone interface later
- 12:31 am Revision 2d67e145: progress on gpif interface
- 12:31 am Revision 014ea687: gpif skeletons
- 12:31 am Revision e25f67d5: skeleton
- 12:31 am Revision cf69f2b3: copied over from u1e, most pins hooked up.
- 12:31 am Revision 038ea250: hook up flow control pins
- 12:31 am Revision 020df898: compiles now
- 12:31 am Revision 6f172696: copied over from other repo. Beginnings of a skeleton fpga image for USRP1-Plus
- 12:13 am Revision 0bee80ca: minor change to tx_bursts
05/26/2011
- 11:55 pm Revision d5a8a22b: Merge branch 'master' into burst_test
- 11:50 pm Revision de912a8d: WBX: keep mixer on when TX idle, and switch TX ant sw to RX when idle to keep ...
- This allows USRPs to maintain a constant phase relationship between MIMO devices while operating.
- 11:50 pm Revision 39bfc25f: add gain to tx burst app
- 09:52 pm Revision 202ae928: added tx_bursts MIMO burst transmit test
- 09:08 pm Revision 2374f708: tx_waveforms: don't have to set time_spec for every pkt in the stream
- 09:00 pm Revision cf780ec4: tx_timed_samples: fix so EOB isn't set on every pkt
- 08:48 pm Revision 5208cc8b: tx_waveform: no SOB for continuous streaming
- 08:09 pm Revision c90282da: UHD: make tx_waveforms MIMO-capable
05/23/2011
- 08:24 pm Revision 92c664bd: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv
- 08:18 pm Revision f9fae337: tvrx2: fix docs formatting typo
- 06:24 pm Revision 4eb40252: Merge branch 'usrp_e100_clock_sync'
- 05:40 pm Revision 7437b27a: Merge branch 'fpga_next' into uhd_master
05/20/2011
- 09:28 pm Revision 9b4fa86a: u1e: incremented compat # to 4 for vita length change
- 08:25 pm Revision 4d947971: usrp-e100: set_ignore_sync_fpga_plus_codec
- 08:25 pm Revision f58abdcb: N210: how the heck did the PPS fix get dropped again
- 06:01 pm Revision 7dbd8353: uhd: picked some minor changes from super packet handler
- 05:49 pm Revision 0f705316: usrp2: turn on ups_per_sec to avoid timeout issues on low sample rates
05/19/2011
- 03:19 am Revision 21856ee1: N210: changes for rev 4 support
- 01:08 am Revision df020c69: uhd: removed deprecated warning API, log+msg now in API
05/17/2011
- 10:12 pm Revision 0aff497d: Merge branch 'master' into release_work
- 10:12 pm Revision 90650435: usrp2: moved register map into #defines, entries for new dsp frontend
- also fixes irq rb
- 06:35 pm Revision 17ecc9a4: uhd: some build system tweaks
- 03:21 am Revision 2960bc88: USRP1: implement MBOARD_PROP_CLOCK_CONFIG, only accepts internal
- 12:04 am Revision 9f1e49eb: E100: fix aux codec ADC reads as per USRP1 in 6f70d1
05/16/2011
- 07:08 pm Revision 22097e81: Merge branch 'master' into release_work
- 06:58 pm Revision 13be0235: Merge branch 'use_vita_length' into next
- 06:57 pm Revision c8565df0: usrp-e100: incremented compat # to 4 for vita length change
- 06:56 pm Revision 204144fa: Merge branch 'next' into use_vita_length
- 06:55 pm Revision 32b0989c: u1e: incremented compat # to 4 for vita length change
05/15/2011
- 03:28 am Revision ea5ce50a: uhd: replace managed buffer shared pointer w/ intrusive pointer to reduce over...
- 03:25 am Revision 4b772ff4: usrp1: correct TX codec rate, it should also read 64e6 when probed
- We were using clock_rate*2 to simulate a codec rate of 128MHz.
This reflected the old gnuradio API, but the rate betw... - 02:57 am Revision f991d3dc: usrp1: apply conditional disables/enables to rx and tx
- Scapped the old gnuradio code for information about VRQ_FPGA_SET_XX_ENABLE.
It turns out that we should disabled + re... - 12:09 am Revision 29a0c916: uhd: add gcc warning for sign comparison mismatch
05/13/2011
- 07:49 pm Revision 3ee0252b: Merge branch 'tvrx2'
- 07:48 pm Revision 5b03ad64: uhd: init log file lock ptr to null
- 07:41 pm Revision 853d8121: uhd: work on logging and message facility initialization
- 07:13 pm Revision a5aece05: Added TVRX2 support
05/12/2011
- 10:34 pm Revision b60418e9: usrp-e100: created device address arg for master clock rate, removed eeprom hack
05/11/2011
- 08:21 pm Revision e6e010e0: usrp2: device locking, use gpid so the process cant lock itself out
- 05:38 pm Revision 328599ee: Merge branch 'master' into next
05/10/2011
05/09/2011
- 11:47 pm Revision 91e32eae: Merge branch 'next' into use_vita_length
- 09:58 pm Revision d8aae182: u1e: get dsp_framer36 from u1p so it can skip the protocol header
- 07:48 pm Revision d5a97d11: u1e: switch to vita_rx_chain module just like other toplevels
- 12:12 am Revision d11bb4e7: usrp-e100: added soft sync for ad9522 clock control
05/08/2011
05/05/2011
- 10:35 pm Revision a7927ae9: Make log locking work with picky boost
- 09:58 pm Revision c9bf4798: usrp1: overload read_eeprom to handle multi-byte reads
- 06:14 pm Revision 5092a25a: usrp1: added more logging to usrp1 iface for debugging
- 03:40 am Revision 9734a743: uhd: various tweaks to log and msg, replaced a few remaining stdio
- 02:53 am Revision 09be0518: uhd: removed more iostream stuff from usrp* implementations
- 02:13 am Revision 805da3ef: usrp-e100: removed stdio prints from implementation
- 01:36 am Revision 7f01386f: uhd: replaced warning post with calls to UHD_MSG(warning)
- The message api can support warnings, error, and status messages.
The default handler is to stdio, but the user can c... - 12:01 am Revision e71d2833: uhd: added interprocess file lock to the logger file
05/04/2011
- 10:27 pm Revision c8dca30d: uhd: replaced many conditional prints with UHD_LOG usage
- 09:34 pm Revision 94399062: uhd: tweaks for logger file entries
- 09:34 pm Revision 0de4f165: usrp: replaced conditional dboard debug prints w/ UHD_LOGV(often)
- 09:34 pm Revision 8426a72b: uhd: moved the logger into the utils subdir
- 09:34 pm Revision 0ac4fe4e: uhd: added configurable default log level and thread safety
- 09:34 pm Revision 400a8542: uhd: work on the backend for a logging facility
05/03/2011
- 11:55 pm Revision 4e0b42af: Merge branch 'master' into next
- 08:35 pm Revision b4fc0d61: usrp2: added REF_MIMO and PPS_MIMO for USRP2 clock config
- Basically, one can tell a MIMO master to lock to MIMO ref and/or time.
This is an alternative to the mimo_mode=slave/...
05/02/2011
- 11:58 pm Revision d66766f8: Merge branch 'rfx_rssi'
- 11:51 pm Revision 4c6394f1: Added docs for sbx
- 10:38 pm Revision cbf58037: Added RSSI sensor for RFX series (not rfx400)
- 06:09 am Revision 3ac502d0: usrp1: toggle the FPGA reset and RX reset registers at init
- 01:21 am Revision 6f0a98ee: USRP1: added support for setting clock rate from EEPROM
- Basically, same deal as the previous changeset but for USRP1.
Modified previous changes so that the key is shorter (m... - 12:26 am Revision 5c6c1796: usrp-e100: add ability to set/get default master clock rate from EEPROM
- Mboard eeprom map class can parse the setting (4 byte float).
The clock control will try to set the eeprom rate if pr...
05/01/2011
- 10:42 pm Revision e75919bc: usrp2: added the concept of device locking to usrp2/nseries devices
- Each iface instance can lock itself to a particular device.
When the device is locked, it cannot be discovered throug... - 09:18 pm Revision 11e856eb: usrp2: combined peek and poke commands and added virtual firmware registers
- It would be nice to have persistent registers in the device to do things like device locking.
Rather than invent a ne... - 04:38 pm Revision 4b18ab84: uhd: fixed typo in tune request/result inter_freq -> rf_freq
- For some reason, the code said intermediate frequency,
however, it was used and treated as RF frequency.
It was alwa... - 01:09 am Revision 46b20f25: usrp2: use default mtu as upper limit unless user specifies
- 12:11 am Revision 493ed897: Merge branch 'master' into next
- Conflicts:
host/lib/usrp/usrp2/usrp2_regs.cpp
04/29/2011
- 10:56 pm Revision 1e57d1c0: usrp2: move card burner code out of get_options so get_options can be used by ...
- 09:27 pm Revision 0479162a: usrp2: allow devices to be discovered when usrp2_iface::make throws
- If the discovery throws an exception, we can still yeild a discovered device.
The error (which is a problem) will re-... - 06:02 pm Revision 6bd7281f: usrp2: added support for GPSDO configuration bits in EEPROM
- Added instructions to install and burn eeprom to documentation.
Made gps_ctrl and gps_time sensor optional.
Added se... - 04:58 pm Revision 4d73aae4: GPS parser fixes for get_time.
- 04:58 pm Revision 44c80698: USRP2/N210: firmware UART read no longer drops 20th char
- 04:58 pm Revision b31cefc5: USRP2: enable GPS by default
- 04:58 pm Revision 4df082cb: N210: implemented mboard sensors for ref lock and MIMO lock
- 04:58 pm Revision a4aa89ed: USRP2: Added GPS time support to the sensors interface. gps_time sensor return...
- 04:55 pm Revision 36314331: uhd: make benchmark example take a rate, and give special warning for usrp1
- 06:00 am Revision 35d88b50: usrp2: card burner protections when the user specifies a device not in the list
- 05:44 am Revision f289d03d: usrp2: include dd.exe in windows installers
- uhd build system downloads dd.exe from ettus.com so we dont have to check it in
- 04:11 am Revision 424462cb: dbsrx: implement SUBDEV_PROP_ANTENNA to give users a better error
04/28/2011
- 02:12 am Revision caff65d7: usrp1: fix for tx under remainder conditions
- The remainder was accidentally lost because the offset to the buffer
was not propagated outside of the commit function.
04/27/2011
- 08:17 pm Revision 1e722731: usrp1: the rx mux was reversed (fixed multi-channel rx)
- 06:27 pm Revision 9daf1f0a: uhd: switch vita unpacker over to using proper vita length
- 01:43 am Revision 3dfdda7c: uhd: updated readme for WBX/SBX work
- 12:54 am Revision 3ff2780a: Merge branch 'gdb_support'
- Conflicts:
host/lib/usrp/dboard/CMakeLists.txt - 12:40 am Revision 190d7cd9: Merge branch 'sbx-adi'
04/26/2011
- 11:37 pm Revision 1a81e2a3: Enhance WBX IQ balance performance through LO drive
- 09:47 pm Revision f92821a2: wbx: split wbx into daughterboard and granddaughterboard implementation
- 09:18 pm Revision 7c70958c: xcvr2450: initialize the max_power variable
- 09:15 pm Revision 7450a658: usrp: support for grand daughter board eeprom
- 09:15 pm Revision 40feb62b: usrp: work on dboard_manager to register an ID for multiple xcvr combinations
- 07:04 pm Revision 4335003e: uhd: added scoped lock to device find and make (for thread safety)
- 01:43 am Revision 59eae14d: usrp1: rmmod usbtest because it interferes
- 01:42 am Revision 2370fa21: uhd: added more hw params to rx_ascii_art_dft
04/24/2011
- 04:56 am Revision a0cfc903: Handle antenna switching and LEDs
- 04:51 am Revision cf7449ef: Updating SBX to latest UHD
- 04:51 am Revision 49ea6363: Makes 2nd SBX proto work
- 04:51 am Revision 625126b5: SBX enable LO LPF at 1.5GHz
- 04:51 am Revision 8882a667: Capture characterization changes
- 04:51 am Revision 941ef7cf: Initial SBX-ADI driver
04/23/2011
- 12:02 am Revision 627075e6: uhd: move thread loop condition flag to before barrier (prevents race condition)
04/22/2011
- 07:02 pm Revision 4834b1a1: N210: Bootloader includes TXRX. No longer uses safe firmware as backup fw.
- 06:47 pm Revision 7b509d6f: N210 fw: Move spif_init into bootload_utils
- 06:45 pm Revision 0366d611: N210: Minor rearranging of bootloader impl in txrx
- 06:28 pm Revision 36130032: N210: TXRX_UHD now has bootloader #ifdef'ed into it. Safe firmware now embedde...
- Also did some cleanup of unused source files and consolidated bootloader stuff into bootloader_utils.
- 02:45 am Revision 3dd74062: N210: Moved u2p_init into main app and changed bootloader behavior to not load...
- 01:57 am Revision aad70cc0: N210: Make new bootloader ignore safe firmware when safe mode button is pushed.
- 01:13 am Revision 9c2e8e19: N210: bootram expanded to 16KB (8 BRAMs) and UDP bootloader added
04/21/2011
- 11:46 pm Revision e1f86cf3: N210: UDP bootloader first stab (16K boot RAM)
- 11:12 pm Revision f9080d0a: N210: UDP bootloader
- 11:12 pm Revision 03a60917: N210: Created UDP bootloader and modified RMI generation to 16K
- 11:12 pm Revision b1c9e4c3: uhd: use int() casts on enum constants to help swig2 parse it as int
- 11:12 pm Revision 737f0100: N210: Additional checks on both the host and firmware sides of the firmware up...
- 06:34 pm Revision ef9ca5f9: N210: Additional checks on both the host and firmware sides of the firmware up...
04/20/2011
- 06:50 pm Revision f5390a18: uhd: use int() casts on enum constants to help swig2 parse it as int
- 12:47 am Revision fdee3ba8: Merge branch 'master' into next
- Conflicts:
fpga/usrp2/top/u2plus/Makefile.N200 - 12:37 am Revision cf5b7b03: usrp-e100: shrink name field to git mcr into eeprom
- 12:18 am Revision 290bb75d: Merge branch 'master' of ettus.sourcerepo.com:ettus/uhdpriv
04/19/2011
- 11:58 pm Revision 00bc8d50: uhd: removed constants.hpp.in, replaced w/ per source compile defines
- 09:20 pm Revision 06e10b5f: uhd: use UHD_PKG_DATA_PATH environment variable to override the one in constants
- The installer sets UHD_PKG_DATA_PATH, we can can handle transplanted builds.
- 07:17 pm Revision 8212f220: Merge branch 'usrp2/discover_with_old_fw'
- 06:17 pm Revision 30a6d480: Merge branch 'usrp2/discover_with_old_fw'
- 06:17 pm Revision 9521c024: Merge branch 'rfx_use_clock_divider'
- 04:36 pm Revision a28099fe: usrp2: improve the compatibility error messages
- 12:17 am Revision 46d0e648: uhd: use UHD_PKG_DATA_PATH environment variable to override the one in constants
- The installer sets UHD_PKG_DATA_PATH, we can can handle transplanted builds.
04/18/2011
Also available in: Atom